Tools/Accessories
Until now, ZIPPS had limited itself to offering waxes and items for their immediate application. But we also learned that customers often demand more, which went beyond what we offer. We carefully weighed up the pros and cons and finally decided to also offer our customers the very extensive range of accessories, especially in the alpine sector, with the 2023/24 winter season. So now all kinds of accessories, from ski tensioners (cross-country or alpine) to the most diverse devices for edge preparation to structural equipment, can be ordered in the shop, although some will not be available until mid-September.
To give you an overview of the large number of articles, we have divided the range into alpine and cross-country skiing as well as work steps and equipment groups.
Adapter Base Edge 1°Professional stop bracket to hang the base edge.Sturdy by its central web.
Recommended for the initial processing of the side edge, it effortlessly eliminates any burr on the side edge. It should always be used before the Finn File is applied. 120 x 20 x 6mm
Aluminum oxide stone for removing burrs after skiing and before resharpening ski edges. The use of the aluminum oxide stone prevents the premature wear of files when sharpening alpine ski edges.
Angle-adjustable special device with roller, made of aluminum on CNC milling machine. For precise file of the alpine ski edges on the ski base side. Angle to set from 0° to 3°, adjustable in steps of 0.5°. Suitable for files and aluminium oxide stones up to 30 mm wide. No file nor aluminum oxide stone included when buying the device!
Cross-country ski team ZIPPS has a new baseball cap for training and leisure in the warm season. Black cotton fabric, ventilation openings. Rigid peak with embroidered team logo.Adjustable strap with Velcro on the back, universal size. For men and women.Fully washable, best without spinning in a laundry bag. Do not put in the dryer!
Brass brush for cleaning files and grinding diamonds. In the case of stubbornly adhering grinding residues, first loosen them with wax cleaner and then brush them off.
1 plastic handle + 2 fleece pads (1 hard and 1 soft)to clean edges, bases and runners. Excellent treatment for the base after fresh grinding.Handle with grip and hook-and-loop-tape for pads, size 120x70mm.Pads: Size 130 x 80 mm, larger than the handle to protect your fingers from sharp edges.
100mmManufactured by: Red CreekTo work in liquid waxes.Proven tool with long lasting cork .Use fine sandpaper to clean the cork. Be careful with sharp steel edges. There is a risk of damage to the cork.
To work in liquid waxes. Natural cork for working the wax onto the base, felt for smoothing the wax film. Light and compact, take along anywhere. Recessed grip, 120 x 60mm
Diamons file "Worldcup" K 600to achieve a smooth surface and sharp edges. Optimum surface finish. 600 grit. Attention: The diamonds are attached to a foil that is glued to the metal body. The system is absolutely stable in use. But: Please do not clean the files in a petrol bath! There is a risk that the adhesive on the foil will come loose.
Diamond file extra fine (K: 1000, dimensions 100mm x 25mm) for polishing the edges of alpine skis after sharpening.
Diamond File for smoothing the edges of alpine skis after sharpening. Measures: 100mm x 25 mm
Replacement diamond file for the Edge Trick, medium, K 300, 20x30mm
Diamond file for removing the burr and sharpening the edges of alpine skis. Measures: 100mm x 25mm, grit 300
High quality DMT Diamond file, fine, K 600, for smoothing the edges of alpine skis after sharpening.
High quality DMT diamond file for removing the burr and sharpening the edges of alpine skis. Measures: 110mm x 23mm. K 325
Double Handle, 200mm, with hand screen.For two roto brushes or for one roto brush plus cork or fleece roller.Manufactured by: Red Creek.Hexagonal bolt, diameter: 10mm, length 200mm - for two brushes
3 file angle guides for evenly file off the side edges at the ski base side. Set of 3 pieces: 0.5° - 0.7° - 1.0°. Suitable for files and grinders up to 25 mm width.
THE pocket tool for alpine skis. With diamond file, ideal for removing the burr and re-sharpening the side edges, even on the slopes. Angle adjustable 0°-5°, incl. diamond "medium".
Felt roller Length: 100mmManufactured by: Red CreekTo work in liquid waxes and for finishing polish. Does not get as hot as a cork roller.
Retaining clamp for fixing oxide stone, files and grinding diamonds on aluminium angles. Used to hold the file securely while tuning edges.
Worldcup file 25 mm width, 250mm length, chrome plated. For alpine side edge sharpeners and angle guides for preparing ski edges, 14 "cutting teeth" per cm.
Optimum polish for the wax film, for the very last work step instead of a steel brush. Gets the last wax residues out of the structure. In this way, the ski is fast from the first moment and does not need to be skied free. For the ambitious winter sportsman, it supplements the soft finish brush. Wooden body with recessed grip,120x70 mm. The traditional soft finish brush is used for brushing powders and liquid waxes.
Finishbrush Nylon, soft A "must have" for anyone using liquid waxes and/or perfluoro powders.Very fine and soft nylon handbrush, removes wax from the micro structure after liquid waxing or use of powders. Smoothes the wax film, but does not harm it.Best and most valuable type of nylonZIPPS logo, with recessed grip, 120x70mm.