Edge preparation toboggan

Aluminum oxide stone for removing burrs after skiing and before resharpening ski edges. The use of the aluminum oxide stone prevents the premature wear of files when sharpening alpine ski edges.

Brass brush for cleaning files and grinding diamonds. In the case of stubbornly adhering grinding residues, first loosen them with wax cleaner and then brush them off.

Diamons file "Worldcup"  K 600to achieve a smooth surface and sharp edges. Optimum surface finish. 600 grit. Attention: The diamonds are attached to a foil that is glued to the metal body. The system is absolutely stable in use. But: Please do not clean the files in a petrol bath! There is a risk that the adhesive on the foil will come loose. 

Diamond file extra fine (K: 1000, dimensions 100mm x 25mm) for polishing the edges of alpine skis after sharpening.

Diamond File for smoothing the edges of alpine skis after sharpening. Measures:  100mm x 25 mm

Diamond file for removing the burr and sharpening the edges of alpine skis. Measures: 100mm x 25mm, grit 300

High quality DMT Diamond file, fine, K 600, for smoothing the edges of alpine skis after sharpening.

High quality DMT diamond file for removing the burr and sharpening the edges of alpine skis.  Measures: 110mm x 23mm. K 325

Worldcup file 25 mm width, 250mm length, chrome plated. For alpine side edge sharpeners and angle guides for preparing ski edges, 14 "cutting teeth" per cm.

Racing File 100 Cut 2Very sharp file for perfect side edges.100x25mm, 16 teeth/cm.Not chrome plated.