Racing File 100 Cut 2

Diamons file "Worldcup"  K 600to achieve a smooth surface and sharp edges. Optimum surface finish. 600 grit. Attention: The diamonds are attached to a foil that is glued to the metal body. The system is absolutely stable in use. But: Please do not clean the files in a petrol bath! There is a risk that the adhesive on the foil will come loose. 

Tool for the first step to file the edge angle. Effective metal removing. Long tool life. 100x25mm, 14 teeth/cm Not chromed.

The Tungsten file (carbide) 20 mm x 30 mm is an accessory and fits the Swing Cut edge sharpener.

Spare cutting blade, round. Fits the side edge sharpener "Pro". Not identical in construction with the original side edge sharpener blade (original: 2 x sharp angles and 2 x radius angles).

Tool for the first step to file the edge angle. Effective metal removing. Long tool life. 100x25mm, 14 teeth/cm Not chromed.

Worldcup file 25 mm width, 250mm length, chrome plated. For alpine side edge sharpeners and angle guides for preparing ski edges, 14 "cutting teeth" per cm.

Aluminum oxide stone for removing burrs after skiing and before resharpening ski edges. The use of the aluminum oxide stone prevents the premature wear of files when sharpening alpine ski edges.

Diamond File for smoothing the edges of alpine skis after sharpening. Measures:  100mm x 25 mm

Diamond file extra fine (K: 1000, dimensions 100mm x 25mm) for polishing the edges of alpine skis after sharpening.

The Tungsten file (carbide) 20 mm x 30 mm is an accessory and fits the Swing Cut edge sharpener.

Diamons file "Worldcup"  K 600to achieve a smooth surface and sharp edges. Optimum surface finish. 600 grit. Attention: The diamonds are attached to a foil that is glued to the metal body. The system is absolutely stable in use. But: Please do not clean the files in a petrol bath! There is a risk that the adhesive on the foil will come loose.