Kits
You are new to waxing? Do you just want a ski, snowboard, or sled that glides well in all conditions? Don't want to spend a lot of your precious time choosing waxes and preparing your winter sports equipment, but would rather enjoy your sport than work in the waxing room? You want your wax to be fluorine-free? Here's the solution: the affordable ZIPPS beginner's set, here in the ZeroFluor version: 1 x G ZeroFluor (100ml) + 1 cork with felt G ZeroFluor is our non-fluorinated universal wax that provides carefree, easy gliding in all conditions and with all snow sports equipment. For fun in winter sports!Application: The base must be clean. Apply a thin layer of wax (sponge applicator). After a drying time of 5-10 minutes, work the wax in well. Then polish or brush the base with the felt.ZIPPS note: If the base has grey spots, it is dried out. In this case, you should either use hot wax or repeat the above process several times until the base is sufficiently coated again. Only polish at the end with the felt side of the cork. All Information at a glance Solid/liquid Wax liquid + 1 cork Application Sponge applicator Quantity/weight per unit 100ml Colour of the bottle Silvergray Fluorination 0% Material Paraffine+additives+solvent Kind of wax Glide wax Use Training, leisure Range of temperature Universal Brand/ produced by ZIPPSZIPPS Skiwachse GmbHWaldernbacher Straße 7D-65620 Waldbrunnzipps@skiwachs.com Country of origin Germany Item number 101201ZF
Set Skin 1 For cross-country skiers with skin skis and ski tourers, ZIPPS offers a clever, fluorine-free product combination for skis, skin zones and climbing skins, conveniently packaged in a blister pack:One bottle of G ZeroFluor (100 ml) + one bottle of SkinC1 cleaner (100 ml)/fluorine-free.ZIPPS G Zero is a wax that also impregnates the skin zones/skins and prevents snow and ice clusters from sticking. The SkinC1 cleaner cleans the skins and, in the case of climbing skins, also the adhesive surfaces and coatings, and is also fluorine-free. Even sensitive acrylate adhesives are not affected.By the way: the cleaner is not a hazardous material (according to IATA DGR) and can therefore be taken on aeroplanes.