Habrus Skitools

The classic nordic waxing stand with supporting legs, super stable and completely foldable. The frame is made of aluminum. Mounted on top: super light and stable ski pads with non-slip rubber. Thus, the Nordic waxing stand weighs 4.9 kg only and is set up in less than a minute. Tighten two wing screws and you're done. When folded for transport or storage, it is only 14 cm high, 38 cm wide and 100 cm long. Also ideal to take along to competitions. The ski is fixed to the binding with a hook. The nordic waxing stand is adjustable for ski lengths from 1.40 m to 2.10 m.Included in delivery are:- Wax trestle, - 2 ski rests and - binding fixation hook

This XC-ski groove scraper is used to remove ski wax from the middle grooves of cross-country skis. It has four different radii for different groove profiles and widths. The groove cleaner is also perfect for cleaning the edges of cross-country skis.

These ski holders (1 pair as shown) can be fixed on any nordic ski vise with legs. They carry the second ski while preparing the other one. Weight: only 150 g.  With rubber pads. They can also be used together with the free hanging storage tray. For XC skis.

This nordic ski holder is made to be fixed with two screw clamps (not included) on a waxing table. The nordic ski holder weighs 2.8 kg only. The very stable combination of aluminum and sturdy plastic rests your skis on non-slip rubber pads. It keeps cross-country skis firmly in place during ski preparation. The skis are fixed on to the ski holders at their bindings. Adjustable to ski lengths from 1.40 m to 2.10 m.

The storage tray made of powder-coated aluminum can be fixed on both sides of ski vises with legs. This gives the advantage that all the tools needed for ski preparation are always at hand. It weighs 0.9 kg only and is super practical.The storage plate fits on any Nordic ski vise where the square profile for hanging it on is no larger than 30 x 30 mm.

This World Cup cross structure tool provides a sensational cross structure with right roller 1.75 mm and left roller 1.75 mm, for wet to very wet conditions as well as glaced snow. The guide rails provide optimum guidance while structuring the XC-ski base. The World Cup cross structure tool imprints a cross-structure when rolling with powerful pressure over the ski base. The structure is not permanent. It fades off the base again when hot waxing. The stone structure of the ski base is not permanently altered. The World-Cup cross-structure tool is neatly and securely packed in the case supplied.