Products from LG-Sport GmbH

Close filters
 
from to
1 From 2
No results were found for the filter!
Waxing-Iron Holder with Silicone
Waxing-Iron Holder with Silicone
Waxing iron holder with silicone protection for mounting on the waxing table. For safe and permanent storage of all waxing irons on the service table to prevent the waxing iron from accidentally falling down. In addition, wax from the...
Content 1 Stück
€50.00 *
Stopper Clou (1 Pair for Fixation of Ski Brakes)
Stopper Clou (1 Pair for Fixation of Ski Brakes)
Ski break holders (1 pair) with practical fixation hook, easy and trouble-free working during the preparation of alpine skis. Ski edges and ski base are freely accessible this way.
Content 1 Paar
€6.00 *
Swing -Cut / Carving-Tuner, 90° to 85°, oxide stone and carbide
Swing -Cut / Carving-Tuner, 90° to 85°, oxide...
The FK/SKS pendulum head system of this edge sharpener causes automatic adjustment of the files or cutting tools to the steel edges of skis and snowboards with any radius. The device is supplied with carbide file and aluminum oxide...
Content 1 Stück
€90.00 *
Tungsten file (carbide) 20 mm x 30 mm for SwingCut
Tungsten file (carbide) 20 mm x 30 mm for SwingCut
The Tungsten file (carbide) 20 mm x 30 mm is an accessory and fits the Swing Cut edge sharpener.
Content 1 Stück
€45.00 *
Edge Trick with Diamond
Edge Trick with Diamond
THE pocket tool for alpine skis. With diamond file, ideal for removing the burr and re-sharpening the side edges, even on the slopes. Angle adjustable 0°-5°, incl. diamond "medium".
Content 1 Stück
€22.00 *
Diamond file for the Edge Trick, medium, K 300, 20x30mm
Diamond file for the Edge Trick, medium, K 300,...
Replacement diamond file for the Edge Trick, medium, K 300, 20x30mm
Content 1 Stück
€8.00 *
Sidewall Planer "Pro"
Sidewall Planer "Pro"
Sidewall planer on aluminum angle. Two different cutting blade shapes - (a) radius and (b) square. Easy repositioning of the blade. Cutting depth adjustable. Incl. carbide cutting blade.
Content 1 Stück
€88.00 *
Supplemetary Cutting-Knife (round) for Sharpener "Pro"
Supplemetary Cutting-Knife (round) for...
Spare cutting blade round. Fits the side edge sharpener "Pro". Not identical in construction with the original side edge sharpener blade (original: 2 x sharp angles and 2 x radius angles).
Content 1 Stück
€15.00 *
File Clamp for Edge Files on Aluminium Guides
File Clamp for Edge Files on Aluminium Guides
Retaining clamp for fixing oxide stone, files and grinding diamonds on aluminium angles. Used to hold the file securely while tuning edges.
Content 1 Stück
€10.00 *
Aluminium Oxide Stone, Grit 180, 100x25mm
Aluminium Oxide Stone, Grit 180, 100x25mm
Aluminum oxide stone for removing burrs after skiing and before resharpening ski edges. The use of the aluminum oxide stone prevents the premature wear of files when sharpening alpine ski edges.
Content 1 Stück
€9.00 *
DMT Diamond File, medium, K 325, 110mm x 23mm
DMT Diamond File, medium, K 325, 110mm x 23mm
DMT diamond file for removing the burr and sharpening the edges of alpine skis.
Content 1 Stück
€40.00 *
DMT Diamond file, fine, K 600, 110 x 23mm
DMT Diamond file, fine, K 600, 110 x 23mm
DMT Diamond file, fine, K 600, for smoothing the edges of alpine skis after sharpening.
Content 1 Stück
€40.00 *
1 From 2
Viewed
Nach oben